| |
ACCESSORIES AVAILABLE WITH THE
PURCHASE OF ONE OF OUR SUPPRESSED .22 RIFLES OR BARRELS
(Prices do not include return
shipping to you)
Hogue Rubber-Coated Stock, $75 Retail (10/22 only)
4x32 satin/nickel rifle scope with matching 1" ring
mounts and standard Weaver scope base, $60 Retail |
Butler Creek Synthetic stock (Folding Hideaway Bipod Stock shown, but no
longer available), $65 Retail (10/22 only)
4x32 matte/blue rifle scope with matching 1" ring mounts for standard
.22 scope base, $40 Retail
4x32 satin/nickel rifle scope with matching 1" ring mounts for
standard .22 scope base, $50 Retail
4x32 matte/blue rifle scope with matching 1" ring mounts, and
standard Weaver scope base, $50 Retail
4x32 satin/nickel rifle scope with matching 1" ring mounts, and
standard Weaver scope base, $60 Retail |
ALL-WEATHER
DH (DAMN HARD) MOLYCOAT FINISHES AVAILABLE WITH THE PURCHASE OF ONE OF OUR FIREARMS OR
SUPPRESSORS
Complete Firearm - $150 (solid matte black, gray, O.D., or
brown) (return shipping included); $35 for each additional color (custom patterns)
Suppressor - $50 for one color, $25 for each additional color
before
after |
CUSTOM FINISHES AVAILABLE FOR
YOUR FIREARM
(Prices do not include return
shipping to you)
DH finish applied to your personal firearm - $150 (solid
matte black, gray, O.D., or brown); $35 for each additional color (custom patterns)
DH finish applied to your personal suppressor - $50 for one
color, $25 for each additional color
|
CUSTOM
Engraving and Inlay
Custom hand engraving, partial or full, your choice of
patterns or scenes, gold or silver inlay (contact us) |
Gunsmithing
Services
Full service gunsmithing, repair, or kit assembly - $55 per
hour (plus any parts and return shipping)
|
ACCESSORIES AND OPTIONS AVAILABLE FOR SBS AND AOW CONVERSIONS
(prices do not include return
shipping) |
Our proprietary Ghost
Ring Front Sight (GRFS) allows you to instinctively point the muzzle at the target or
threat. Sighting straight down the receiver and barrel with both eyes open is a
natural act that enhances depth perception, field of view, and light collection. The
dominant eye is drawn to focus through the open port and frame the target so you know that
what you see is what you hit.
Optional angled barrel porting reduces flash while minimizing barrel rise. |
Barrel porting only - $100 |
Ghost ring front sight pinned to barrel rib -
$150 |
Permanently
mounted sight with slotted porting |
Pinned
sight with alternate porting |
Ghost ring front sight screwed in place on smooth
round barrel (only for barrels without removable chokes) - $175 |
Ghost ring front sight silver soldered onto
smooth round barrel and refinished (for barrels you plan to have threaded for removable
chokes) - $250 |
CHOKES AND CHOKE
INSTALLATIONS
(shipping not included)
Thread single
barrel for removable Remchoke, Winchoke, or Tru-choke (choke not included) - $100
IMPORTANT
NOTE: Never fire an internally threaded shotgun barrel without a choke installed.
Otherwise, you risk damaging the threads. This is especially important if the barrel
lug is located within two inches of the muzzle (see photo above), because reaming and
threading the muzzle weakens the area over the lug. Installing a choke or muzzle
brake will reinforce this barrel wall without any negative effect. However,
installing a shotgun suppressor adds a great deal more weight and stress to the
barrel. To ensure this is not a problem, Silencerco has tested their SALVO
suppressor without any issues on barrels that have been reamed and threaded over the
barrel lug. As an added safety measure, if you intend to use a suppressor, we
suggest the barrel extend two inches beyond the barrel lug. On most Remington 870
shotguns this allows the use of an extended magazine cap, thus increasing your magazine
capacity by one round.
Thread double
barrel or over/under for removable Remchoke, Winchoke, or Tru-chokes (chokes not included)
- $175
Note: Many SxS
shotguns with factory installed removable chokes have barrel walls that are thinner in the
middle, then thicken near the muzzle. This is done to balance the gun and keep the
weight down, while retaining enough metal to install removable chokes. As a result,
once the barrels are shortened to the desired length, there may not be enough remaining
wall thickness to install chokes. There is no reliable way to determine if the
barrels have sufficient wall thickness for choke installation until they have been cut. |
Removable Full Choke Tube (various
makes) - $15 (closeout)
|
Tactical Breacher Choke Tube - $75
|
One round Magazine Tube Extension from Nordic and Scattergun
Technologies fits 14 Remington 870, 11-87, and 1100, $75 (includes magazine
modification and installation). Available (L to R)
no sling stud, left side sling mount, right side sling mount
vertical sling mount, quick detachable universal sling stud |
|
Install new top mounted
Weaver base on existing drilled and tapped shotgun receiver, $25
Drill and tap shotgun receiver, and install new Weaver style base,
$125 |
|
Install new top mounted Mesa Picatinny
base on existing drilled and tapped shotgun receiver, $65
Drill and tap shotgun receiver, and install new Mesa Picatinny
base, $175 |
|
Weaver Picatinny rail installed on
existing front swing swivel lug, $35 per gun |
|
Hogue Tamer overmolded shotgun pistol rear grip,
Remington 870, Mossberg 500, $45 installed Hogue Tamer overmolded shotgun
pistol rear grip and forend, Remington 870, Mossberg 500, $50 installed |
|
Tac-Star Synthetic Pistol Grip (front) - Mossberg
500/590, $35 installed Tac-Star Synthetic Pistol Grip (front) - Remington
870, $35 installed
Tac-Star Synthetic Pistol Grip (front) Winchester 1200/1300, $35 installed
Tac-Star Synthetic Pistol Grip (rear) - Mossberg 500/590, $35 installed
Tac-Star Synthetic Pistol Grip (rear) - Remington 870, $35 installed
Tac-Star Synthetic Pistol Grip (front) Winchester 1200/1300, $35 installed |
|
Blackhawk Knoxx Breacher Grip with
internal recoil spring, for Mossberg 500/590 and Remington 870,
$80 installed |
|
Shockwave RAPTOR pistol grip for
Remington 870 (L) or Mossberg 500/590 series (R), $45 installed |
|
ATI TALON
pistol grip for Remington 870, $75 installed
ATI TALON pistol grip for Mossberg 500/590,
$75 installed
|
|
PROMAG TRI-RAIL Picatinny polymer forearm for 12 GA
Remington 870 or Mossberg 500/590, $50 installed |
|
TAPCO
Intrafuse Remington 870 12 GA forend with Picatinny rail, $50 installed |
|
TAPCO Intrafuse Mossberg 500/590 12 GA forend with Picatinny
rail, $50 installed |
|
ATI TACTICAL
SHOTGUN FOREND with imbedded Picatinny rails (fits 12 GA Rem 870, Mossberg 500/590, and
Winchester 1200/1300), $50 installed |
|
Mako PR-MO Picatinny tri-rail forends
for 12 GA Mossberg 500/590, $75 installed |
|
Mako PR-870 Picatinny tri-rail forends
for 12 GA Remington 870, $75 installed |
|
GG & G single rail Picatinny
forend for 12 GA Remington 870, $125 installed
(specify right side or left side mount) |
|
ATI FOREND PISTOL GRIP (attaches to
Picatinny rail), $50 installed |
|
MAKO tactical folding grip, $50
installed |
|
MAKO tactical
folding grip for 1 1/8 flashlight, fits Weaver and Picatinny rails, $100 installed
(flashlight not included) |
|
SUREFIRE
12 GA Shotgun Forend Weapon Lights
Features include constant and momentary
switch, optional LED or Incandescent models.
Requires minimum 14 12 gauge barrel
on Remington 870. Depending upon
configuration, may require
longer barrels on other shotguns for
flush fitting.
Available for Mossberg 500/590 and
Remington 870
$400 - $450 installed (contact us for
details) |
|
Insight Technologies 250 lumen forend
light for Mossberg 500/590 or Remington 870, $300 installed |
|
TAC-STAR Weapons Light System (WLS) 2000
$100 installed on Remington 870, Mossberg 500/590, or Browning BPS
|
|
TAC-STAR 12 GA Side Saddle Shotshell
carrier
$40 installed on Remington 870/1100/11-87, Winchester 1300, or
Mossberg 500/590/835
$75 installed on Browning BPS |
|
Trijicon tritium glow-in-the-dark
shotgun front post sight, $50 installed in existing hole, $75 if new hole must be drilled
and tapped |
|
Scattergun
Technologies TRAK-LOCK II Ghost-Ring Sights with Tactical Tritium Front
Sight and Regular Rear Sight for Remington Shotguns (specify 12 or 20 GA)
OPTIONS
Drill, tap, and install new rear sight; epoxy and pin
new front sight over existing pedestal base, $300
Drill, tap, and install new rear sight; install new
pedestal front sight base, epoxy and pin new front sight over new pedestal base, $475
Drill, tap, and install new rear sight; relocate and
silver solder existing pedestal base; shorten and refinish barrel; epoxy and pin new front
sight over old pedestal base, $550
Drill, tap, and install new rear sight; silver solder in
new pedestal base; shorten and refinish barrel; epoxy and pin new front sight over new
pedestal, $575
(NOTE: Shipping is extra. For short
barrel shotguns that require NFA engraving and/or alteration of the action bar and/or
forearm, additional charges will apply.) |
|
Scattergun
Technologies TRAK-LOCK II Ghost-Ring Sights with Single-Dot Tritium
Front Sight and Two-Dot Tritium Rear Sight for Remington Shotguns (specify 12 or 20 GA)
OPTIONS
Drill, tap, and install new rear sight; epoxy and pin
new front sight over existing pedestal base, $350
Drill, tap, and install new rear sight; install new
pedestal front sight base, epoxy and pin new front sight over new pedestal base, $525
Drill, tap, and install new rear sight; relocate and
silver solder existing pedestal base; shorten and refinish barrel; epoxy and pin new front
sight over old pedestal base, $600
Drill, tap, and install new rear sight; silver solder in
new pedestal base; shorten and refinish barrel; epoxy and pin new front sight over new
pedestal, $625
(NOTE: Shipping is extra. For short
barrel shotguns that require NFA engraving and/or alteration of the action bar and/or
forearm, additional charges will apply.) |
|
PSI Ghost-Ring Tactical Tritium Rear Sights for Benelli, Ithaca,
Mossberg, Remington, and Winchester Shotguns, $200 installed.
This sight is
intended to work with an existing Post Front Sight. If your barrel is being
shortened or does not have a post front sight, please contact us for a fitting charge.
|
|
PSI Ghost-Ring Tactical Tritium Rear Sights for Benelli, Ithaca,
Mossberg, Remington, and Winchester Shotguns, $275 installed (includes receiver drilling
and tapping and fitting Weaver style base to shotgun).
This sight is
intended to work with an existing Post Front Sight. If your barrel is being
shortened or does not have a post front sight, please contact us for a fitting charge.
|
|
XS Big Dot Tritium Shotgun Sight
(NOTE: The Big Dot
is not intended for use with a rear sight)
OPTIONS
Epoxy and pin XS Big
Dot tritium front sight over existing pedestal mounted bead, $100
Silver solder new
pedestal mounted bead to barrel, refinish barrel, and epoxy and pin XS Big Dot sight, $275
Relocate and silver
solder existing pedestal mounted bead to barrel, shorten and refinish barrel, and epoxy
and pin XS Big Dot sight, $350
Silver solder new
pedestal mounted bead to barrel, shorten and refinish barrel, and epoxy and pin XS Big Dot
sight, $375
(NOTE: Shipping is extra. For short
barrel shotguns that require NFA engraving and/or alteration of the action bar and/or
forearm, additional charges will apply.)
|
|
XS
Tritium front sight blade
OPTIONS
Relocate existing
ramp, shorten and refinish barrel, reinstall original blade insert, $225
Relocate existing
ramp, shorten and refinish barrel, install new XS tritium blade insert, $300 |
|
XS Ghost-Ring Rear Sight and Tritium front sight blade for
existing ramp
Drill and tap receiver
to accept new rear sight that aligns with existing front sight blade and install tritium
front blade post, $300 |
|
XS Ghost-Ring Rear Sight and Tritium front sight blade
OPTIONS
Drill and tap Remington 870 receiver and
install new XS rear sight; epoxy and pin new front sight over existing pedestal base, $300
Drill and tap Remington 870 receiver and
install new XS rear sight; install new pedestal front sight base and refinish barrel,
epoxy and pin new front sight over new pedestal base, $475
Drill and tap
Remington 870 receiver and install new XS rear sight; relocate and silver solder existing
dovetailed front sight ramp, shorten and refinish barrel, and install new XS tritium front
blade post, $550
Drill and tap
Remington 870 receiver and install new XS rear sight; silver solder new dovetailed front
sight ramp, refinish barrel, and install new XS tritium front blade post, $575
(NOTE: Shipping is extra. For short
barrel shotguns that require NFA engraving and/or alteration of the action bar and/or
forearm, additional charges will apply.) |
|
XS Picatinny rail with Ghost-Ring Rear Sight and Tritium front
sight blade
OPTIONS
Drill and tap
Remington 870 receiver and install Picatinny rail with rear sight; relocate and silver
solder existing dovetailed front sight ramp, refinish barrel, and install XS tritium front
blade post, $425
Drill and tap
Remington 870 receiver and install Picatinny rail with rear sight; relocate and silver
solder existing dovetailed front sight ramp, shorten and refinish barrel, and install XS
tritium front blade post, $525
Drill and tap
Remington 870 receiver and install Picatinny rail with rear sight; silver solder new
dovetailed front sight ramp, refinish barrel, and install XS tritium front blade post,
$450
Drill and tap
Remington 870 receiver and install Picatinny rail with rear sight; silver solder new
dovetailed front sight ramp, shorten and refinish barrel, and install XS tritium front
blade post, $550
(NOTE: Shipping is extra. For short
barrel shotguns that require NFA engraving and/or alteration of the action bar and/or
forearm, additional charges will apply.) |
|
Speedfeed Tactical spare shell pistol grip stock and forend for
Remington 870 and Mossberg 500/590,
$100
installed |
|
Speedfeed Tactical spare shell stock and forend for Remington
870 and Mossberg 500/590,
$100
installed |
|
Speedfeed Tactical spare shell pistol grip stock and forend for
Remington 1100,
$100
installed |
|
Blackhawk Knoxx SpecOps Adjustable Shotgun Stock with built-in
shock absorber
for
Remington 870 or Mossberg 500/590,
$125
installed |
|
Blackhawk Knoxx Compstock for Remington 870 or Mossberg 500/590,
$125
installed |
|
Hogue Tamer
overmolded shotgun stock and forend, Remington 870, Mossberg 500/590,
$75 installed |
|
ATI pistol grip buttstock for Rem 870, 1100, 11-87,
$75
installed |
|
ATI
adjustable stock with forend for Mossberg 500/590, Remington 870, Winchester 1200/1300, or
Ithaca 37,
$175 installed
stock only $100 installed |
|
HOME .22 RIFLE .22
PISTOL CUSTOM & SCRC SUPPRESSORS
SBS/AOW SBR
MG CLOSEOUTS LEGAL
SERVICES ORDERS
HISTORY
|